Products and Services

Products and Services

  info@alemlube.co.nz  1300 159 311

Waste oil evacuators

Product

Evacuator - Waste Oil 10LPM 240V

Piusi

Product Code: 271900N

New version from Piusi (replaces 271900)
240v dipstick probe style model with continuos operation
Automatically shuts off pump when all oil has been extracted with audible alarm Internal self priming pump, pumps waste oil to a waste oil tank
Vacuum meter shows unit is operating
Flow rates: up to 10LPM when oil is hot
Noise: less than 65 db
Inlet / outlet: 1/2" BSPF
Complete with wall mount bracket, set of probes & hose

Product

Manual Waste Oil Extractor

Alemlube

Product Code: 41006N

• 6.5L capacity
• Portable, lightweight and self-contained
• Extracts waste oil from motor vehicles, motor bikes, lawn mowers,
• Marine engines, stationary engines and all-terrain vehicles
• Also suitable for salt water (bilge) and water applications
• Complete with 3 probes to suit various dipsticks & applications
• Operates at any angle
• Automatically prevents fluid overflow or leakage from the tank
• Maximum operating temperature of 100ºC
• Run an engine for 5 mins. to ensure that oil is warm and lowers viscosity
• Flush with fresh water after using salt water 
Note: Not to be used for long term oil storage

Product

Mobile Waste Oil Extractor

Product Code: 30091

• Extracts and captures waste oil from crankcases, transmissions and differentials
• Clear inspection chamber capacity of 12L
• Holding tank capacity of 80L
• Chamber depressurisation time of 25 seconds
• Suction speed of 6.5 L/min
• Suction hose specification of 1/2” x 2,000mm
• Draining hose length of 1” x 2,000mm
• Draining pressure of 14psi (1bar)
• 1/4” air inlet connection
• 12 month warranty
• 30090 Mobile waste oil extractor without clear inspection chamber

Product

Mobile Waste Oil Extractor

Product Code: 30090

• Extracts and captures waste oil from crankcases, transmissions and differentials
• Holding tank capacity of 80L
• Chamber depressurisation time of 25 seconds
• Suction speed of 6.5 L/min
• Suction hose specification of 1/2” x 2,000mm
• Draining hose length of 1” x 2,000mm
• Draining pressure of 14psi (1bar)
• 1/4” air inlet connection
• 12 month warranty

Product

Waste Oil Evacuator, 100L

Product Code: 372600

Venturi effect creates vacuum to suck waste oil out of vehicles dipstick by way of probe accessories
Can be used as an autonomous unit , disconnected from air (once primed)Discharge hose is 1.6m & works by attaching unit to a tyre inflator with air on continuously

Product

Waste Oil Evacuator, 100L, 10L Clr Bowl

Samoa

Product Code: 372100

Samoa
Includes a 10 litres transparent chamber that can be used as vacuum reservoir and allows an immediate inspection of the extracted waste oil
Venturi effect creates vacuum to suck waste oil out of vehicles dipstick by way of probe accessories
Can be used as an autonomous unit , disconnected from air (once primed)Discharge hose is 1.6m

Product

Waste Oil Evacuator, 24L Reservoir

Product Code: 371600

Lightweight/portable waste oil changer/extractor ideal for boats
The reservoir, wheel mounted, has a capacity of 24 litres
Suction capacity after vacuum: 13-16 litres
Suction time with HOT oil (70/80c) and probe diameter 6mm, is 1.5-2 litres per minute
Suction hose: 2 metres
Gravity discharged by removing the cap on top of the unit