Product Code: 309010
Gear pumpWith sintered steel gearsNoise levels less than 65dB10 LPM when pumping SAE30 oilCan pump hot oil up to 70cMaximum viscosity: 600cStDuty Cycle: 30 minutes on, 30 minutes off35 AmpWeight: 4.9kg 3/4" BSPF portsMaximum pressure: 5 barIntegrated bypass
Product Code: 341040
• Choice of 12V/24V operation
• Flow rates of 70L/min (24V), 35L/min (12V)
• 1" BSP(f) inlet/outlet
• Compact design
• Dimensions of 150mm x 155mm x 252mm
• Easy to install
• Fitted with an on/off switch
• Suitable for the transfer of diesel fuel
• Duty cycle of 30 minutes on, 30 minutes off
• Fitted with an integrated filter and by-pass valve
• Maximum delivery from tank to pump of 6m
• Maximum suction height with a non-return valve of 4m
• Maximum suction height without a non-return valve of 2m
• Cast iron body
• Sintered steel rotors
• Acetal resin vanes
• Aluminium casing motor
Product Code: 305200
Carry cage not included
1.5Kw 240vac heavy duty gear pump & motor capable of flow rates up to 50 LPM free flow
Can pump SAE30 oil through hose reels
Includes thermal protection & recirculation bypass
Inlet/outlet: 1" BSPF
Maximum operating pressure: 150psi
Weight: 35Kg
Dimensions: 600Lx400Hx350W mm
Product Code: 304100
Gear pump
9LPM when pumping SAE30 oil
Can pump hot oil up to 70c
1" BSPF inlet/outlet
Weight: 9kg
Maximum pressure: 160psi
240V, 50Hz
1450 rpm, 550w
Integrated bypass
Product Code: 334900
Vane pump for continuous operation
Sintered steel rotor with resin vanes
Noise levels less than 70dB
25 LPM when pumping SAE30 oil
Can pump hot oil up to 70c
Weight: 14.2kg
Maximum pressure: 6 bar
750 watt; 1450 rpm
Integrated bypass
3/4" BSPF ports
Product Code: 305300R1
Complete with carry cage1.5Kw 240vac heavy duty gear pump & motor capable of flow rates up to 50 LPM free flowCan pump SAE30 oil through hose reelsIncludes thermal protection & recirculation bypassInlet/outlet: 1" BSPFMaximum operating pressure: 150psiWeight: 35Kg Dimensions: 600Lx400Hx350W mm
Product Code: 310010
Gear pump
With sintered steel gears
Noise levels less than 65dB
10 LPM when pumping SAE30 oil
Can pump hot oil up to 70c
Maximum viscosity: 600cSt
Duty Cycle: 30 minutes on, 30 minutes off
35 Amp
Weight: 4.9kg
3/4" BSPF ports
Maximum pressure: 5 bar
Integrated bypass
Product Code: 561613
Product Code: 561611
Product Code: 395050
• True flow rate of 140L/min at end of hose & auto nozzle
• 1” BSP outlet thread, 1-1/4” inlet thread
• Continuous duty
• Thermal protection
• IP55 rating
• Suitable for rapid delivery of diesel
• Power cable included
• Weight of 25kg
Product Code: 395020
• True flow rate of 140L/min at end of hose & auto nozzle
• 1” BSP outlet thread, 1-1/4” inlet thread
• Continuous duty
• Thermal protection and IP55 rating
• IECEx approved for use with petrol, Avgas and kerosene
• No power cable included, electrician to hard wire
• Weight of 25kg
Product Code: JP-140-PP-HC-1000
• Internally ventilated 240V, 50/60 Hz, 450 Watt motor
• Compactly built, lightweight (2.3kg) and powerful motor
• Flow rates of up to 49L/min
• Polypropylene pump tube suitable for transferring acids, alkalies and detergents
• Thermal motor protection increases motor service life
• On/off switch prevents uncontrolled start after power failures
• Pump tube is easily unscrewed for cleaning purposes, or for changeover to another pump tube
• Chemical resistant polypropylene electric motor housing
• Polypropylene pump tube 1,000mm length, 32mm diameter
• Suitable for hydrochloric acid, phosphoric acid, liquid fertiliser, citric acid, iron(II) & iron(III), chloride and distilled water
• Operating temperatures of up to 50ºC
• Supplied complete with electric motor & poly pump tube, 2m PVC hose, stainless steel hose clamps and polypropylene nozzle
• Impellar priming option for applications involving longer & higher transfer distances
• Manufactured in Germany
Product Code: 334800
• High performance with high transfer flow rates
• Electric, single phase 240V motor
• Self priming gear pump with flow rates up to 65L/min.
• Compact design weighing just 22.5kg
• High viscosity transfer of oils up to 1000cSt
• Maximum pressure of 130psi (9 bar)
• Unique Gerotor Technology provides a radial backlash
system providing a constant flow and low noise output
• Cast iron, steel and brass wetted parts
• Overload protection with a pressure regulator
• 1350 motor revolutions with and IP rating of 54
• Maximum fluid temperature 100c⁰
• Inlet and outlet thread 1½” BSP with an FKM seal
• Small in size, silent and easy to fit and suitable for oils,
lubricants and silicone liquids
• Suitable for transferring from fixed or mobile tanks
